Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 6 |
Rear brake binding | 4 |
Brake pipe excessively corroded | 4 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Registration plate issues | 2 |
Brake performance not tested |3.7.A.1| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Headlamp aim out of alignment | 2 |
Offside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Brake hose excessively deteriorated | 1 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Rear Position lamp not working side light (4.2.1 (a) (ii)) | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Rear fog lamp does not face the rear (4.5.4 (a)) | 1 |
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt swivel (5.3.4 (b) (ii)) | 1 |
Offside Rear Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt swivel (5.3.4 (b) (ii)) | 1 |
Rear fog lamp switch missing (4.5.3 (a)) | 1 |
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 1 |
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Rear brake application uneven | 1 |
Registration plate lamp issues | 1 |
Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |