| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Registration plate lamp issues | 3 |
| Rear brake binding | 3 |
| Brake pipe excessively corroded | 3 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Direction indicator not working |1.4.A.2c| | 1 |
| Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Brake clevis joint has restricted free movement |3.5.1k| | 1 |
| Rear brake application uneven | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Registration plate issues | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Headlamp aim out of alignment | 1 |
| Offside Front Electrical wiring inadequately supported |1.9.2a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded middle and lower |5.2.6| | 1 |
| Offside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Exhaust system not adequately supported held by cable ties |7.1.1| | 1 |
| Trailer electrical socket insecure |1.9.3a| | 1 |
| Battery insecure |1.9.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Nearside Front Upper Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shackle |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shackle holes |5.3.6 |a| |i|| | 1 |
| Offside Front Front suspension locking device missing hub bolt |2.5.A.4| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded pannell near shackle |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both sides x member |2.4.A.3| | 1 |