| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear brake binding | 2 |
| Brakes imbalanced across an axle | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Headlamp aim out of alignment | 2 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Fuel tank insecure rear strap broken |7.2.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring anchor area |6.1.A.1| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Steering system excessively rough |2.2.D.1| | 1 |
| Rear fog lamp insecure |1.3.2a| | 1 |
| Battery insecure |1.9.1| | 1 |
| Nearside Rear Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Offside Rear Service brake juddering severely |3.7.C.2| | 1 |
| Rear brake application uneven | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Offside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Axle king pin has excessive play in pin and/or bush adversely affecting the steering Re grease both front as weeping |2.5.A.3a| | 1 |
| Offside Front position lamp|s| insecure Put back in to get through test but keeps falling out needs new bulb holder of a secure repair |1.1.A.3a| | 1 |
| Offside Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Nearside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Upper Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock absorber mount (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bump stop (5.3.6 (a) (i)) | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |