| Most common failures | No# failures |
|---|
| Battery insecure |1.9.1| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Rear parking brake recording little or no effort | 3 |
| Registration plate lamp issues | 2 |
| Headlamp aim out of alignment | 2 |
| Brake pipe excessively corroded | 2 |
| Rear brake application uneven | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Indicator switch missing |1.4.A.1| | 1 |
| Windscreen wiper control is inaccessible to the driver switch missing |8.2.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded fore |2.4.A.3| | 1 |
| Headlamp switch missing |1.7.1| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e) | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a) | 1 |
| Brake pipe inadequately clipped (3.6.B.1) | 1 |
| Nearside Rear Shock absorber has an excessively worn bush (2.7.4) | 1 |
| Offside Rear Shock absorber has an excessively worn bush (2.7.4) | 1 |
| Position lamp switch faulty |1.1.A.1| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Exhaust mounting missing |7.1.1b| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Offside Front Power steering component|s| leaking Steering rack |2.3.3b| | 1 |
| Offside Exhaust has a major leak of exhaust gases Mid silencer box |7.1.2| | 1 |
| Offside Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Windscreen wiper not operating automatically when switched on both |8.2.1b| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Speedometer cannot be illuminated. |6.7.3| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front brake application uneven | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Offside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Brakes imbalanced across an axle | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear brake binding | 1 |
| Offside Rear coil spring fractured |2.4.C.1a| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area. (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |