| Most common failures | No# failures |
|---|
| Horn not working (7.7 (a)) | 6 |
| Brake hose excessively deteriorated | 2 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Registration plate lamp issues | 2 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 2 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Battery insecure |1.9.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Offside Rear Statutory seat belt missing |5.1.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill under vehicle |5.2.6| | 1 |
| Fuel system component leaking engine area |7.2.3| | 1 |
| Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Position lamp not working side (4.2.1 (a) (ii)) | 1 |
| Windscreen washer not working | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Emissions not tested |8.2.1.2 |d|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 1 |
| Brake performance not tested |1.2.1 |g|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases CENTRE PIPE SPLIT (6.1.2 (a)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Anti-lock braking system warning lamp indicates an ABS fault | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength cross member/ marked in yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced x 2 holes on inner sill/marked in yellow (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced marked in yellow (7.1.1 (a) (i)) | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |