Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 33 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 17 |
Headlamp aim out of alignment | 17 |
Registration plate lamp issues | 16 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 9 |
Offside Front position lamp|s| not working |1.1.A.3b| | 8 |
Rear fog lamp missing |1.3.2a| | 7 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 7 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 7 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 6 |
Brake hose excessively deteriorated | 6 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 5 |
Windscreen washer not working | 5 |
Rear fog lamp switch missing |1.3.1a| | 5 |
Nearside Stop lamp not working |1.2.1b| | 5 |
Anti-lock braking system warning lamp indicates an ABS fault | 5 |
Rear fog lamp not working |1.3.2b| | 5 |
Offside Rear fog lamp missing |1.3.2a| | 5 |
Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Horn not working |1.6.2a| | 4 |
Offside Rear fog lamp not working |1.3.2b| | 4 |
Offside Stop lamp not working |1.2.1b| | 4 |
Brakes imbalanced across an axle | 4 |
Rear brake binding | 4 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 4 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Emissions not tested |8.2.1.2 |d|| | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Offside Rear Rear fog lamp not working |1.3.2b| | 3 |
Registration plate issues | 3 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
Rear fog lamp tell tale missing |1.3.1b| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 2 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
Nearside Front position lamp(s) not working (1.1.A.3b) | 2 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 2 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Stop lamp|s| not working high level |4.3.1 |a| |ii|| | 2 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 2 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 2 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Windscreen wiper blade insecure | 2 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 2 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
Brake pipe excessively corroded | 2 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced seal (6.1.1 (a) (i)) | 1 |
Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced seal (6.1.1 (a) (i)) | 1 |
Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced seal (6.1.1 (a) (i)) | 1 |
Offside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced seal (6.1.1 (a) (i)) | 1 |
Central Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Rear Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Central Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3) | 1 |
Position lamp not working both front sidelights (4.2.1 (a)) | 1 |
Offside Front position lamp(s) not working (1.1.A.3b) | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
Nearside Headlamp not working on dipped beam (1.7.5a) | 1 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Rear fog lamp switch missing (4.5.3 (a)) | 1 |
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Anti-roll bar pin or bush excessively worn Both Rear D Mounting Bushes (5.3.4 (a) (i)) | 1 |
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Power steering ram|s| leaking from a failed component |2.3.3b| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Fluid leak harmful to the environment or a risk to other road users |8.4.1 |a| |i|| | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded within 30cms of body mounting (6.2.2 (d) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch corroded within 30cms of body mounting (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded within 30cms of seat belt prescribed area (6.2.2 (d) (i)) | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Rear Other passenger door cannot be opened from outside the vehicle side door |6.2.3 |a|| | 1 |
Exhaust emissions likely to be affected by an exhaust leak flexi |8.2.1.1 |b|| | 1 |
Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 1 |
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Power steering fluid level below minimum |2.3.1| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to foot step (5.3.6 (a) (i)) | 1 |
Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
Nearside Front Battery insecure |1.9.1| | 1 |
Offside Front Battery insecure |1.9.1| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
rear parking |secondary| brakes imbalanced | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Emissions not tested due to coolant leak |7.3.A.1| | 1 |
Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c)) | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Fuel pipe insecure |7.2.1| | 1 |
Front brake application uneven | 1 |
Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 1 |
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2| | 1 |
Front Headlamp aim beam image obviously incorrect both |1.8.A.1b| | 1 |
Front Headlamp not working on main beam both |1.7.5a| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 1 |
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting missing |5.3.3 |a| |ii|| | 1 |
Nearside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush fixing bush |2.4.G.2| | 1 |
Trailer electrical socket insecure (1.9.3a) | 1 |
Nearside Rear Anti-roll bar linkage fractured (2.4.G.1) | 1 |
Anti-lock braking system warning lamp does not illuminate (3.4.1b) | 1 |
Windscreen has damage | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
Offside Rear position lamp(s) not working (1.1.A.3b) | 1 |
Nearside Stop lamp not working (1.2.1b) | 1 |
Rear fog lamp not working (1.3.2b) | 1 |
Offside Headlamp not working on main beam (1.7.5a) | 1 |
Battery insecure (1.9.1) | 1 |
Suspension component mounting prescribed area is excessively corroded both sides (2.4.A.3) | 1 |
Offside Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 1 |
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Offside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Electrical wiring inadequately supported |1.9.2a| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside Front Position lamp not working 501 (4.2.1 (a) (ii)) | 1 |
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 1 |
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Nearside Headlamp aim beam image obviously incorrect no pattern |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect no pattern |1.8.A.1b| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside rear chassis corroded within 30cm of towbar mounting |6.1.1 |c| |i|| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
Offside Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.3.A.1| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded front cross member |2.4.A.3| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt split |2.1.3 |g| |ii|| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt split |2.1.3 |g| |ii|| | 1 |
Windscreen in an unacceptable condition (3.2 (c) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i)) | 1 |
Exhaust has a major leak of exhaust gases Back box (6.1.2 (a)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i)) | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
Lower Steering column universal joint has excessive play at steering rack |2.1.5| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
Nearside Rear Body panel corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member |6.1.1 |c| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Centre Exhaust has a major leak of exhaust gases flexi |7.1.2| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Central Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Exhaust emissions likely to be affected by an exhaust leak rear box (8.2.1.1 (b)) | 1 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |