Most common failures | No# failures |
---|
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Headlamp aim out of alignment | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 3 |
Registration plate lamp issues | 3 |
Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Centre Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 1 |
Rear brake binding | 1 |
Rear brake application uneven | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Offside Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Anti-roll bar missing |2.4.G.1| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Centre Rear fog lamp not working |1.3.2b| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake cable locking device insecure |3.5.1l| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Steering retaining device missing |2.2.C.1g| | 1 |
Offside Steering retaining device missing |2.2.C.1g| | 1 |
Offside Front Headlamp aim not in a clean condition affecting light output |1.2.4a| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Exhaust mounting missing |7.1.1b| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |