| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 46 |
| Brake pipe excessively corroded | 26 |
| Registration plate lamp issues | 19 |
| Windscreen wiper does not clear the windscreen effectively | 19 |
| Brake hose excessively deteriorated | 15 |
| Parking brake lever has no reserve travel |3.1.6b| | 10 |
| Rear fog lamp not working |1.3.2b| | 9 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 7 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 5 |
| Brakes imbalanced across an axle | 5 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 4 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Windscreen washer not working | 4 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 4 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 4 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 3 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Windscreen wiper blade insecure | 2 |
| Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
| Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 2 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Offside Front Shock absorbers has a serious fluid leak | 2 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Shock absorbers has a serious fluid leak | 2 |
| Rear brake disc in such a condition that it is seriously weakened | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Registration plate issues | 2 |
| All position lamps not working all not working |1.1.A.3b| | 1 |
| Nearside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill rotten |2.4.A.3| | 1 |
| Nearside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 1 |
| Offside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Nearside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded n/s and o/s outer sills |2.4.A.3| | 1 |
| Nearside Rear Brake hose leaking |3.6.A.1| | 1 |
| Offside Rear Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
| Power steering malfunctioning |2.3.3a| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint causing damage to brake disc and hub |2.4.G.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis top mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis top mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Emissions not tested (8.2.1.2 (d)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Brake pipe inadequately clipped front to rear brake pipes |3.6.B.1| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect and dim (4.1.2 (c)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak silencer holed. (Lambda to high) (8.2.1.1 (b)) | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering INNER SILL (6.1.1 (c) (ii)) | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering INNER SILL (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering INNER SILL , CORROSION AND POOR QUALITY REPAIR (6.1.1 (c) (ii)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering INNER AND OUT SILL CORROSION (6.1.1 (c) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Emissions unable to be completed (8.2.1.2 (d)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal 30cm leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal . 30cm from seat mounting (6.1.1 (c) (i)) | 1 |
| Rear Rear fog lamp not working centre (4.5.1 (a) (ii)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Power steering component leaking steering Rack. (2.1.5 (a)) | 1 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Front brake disc excessively scored |3.5.1h| | 1 |
| Nearside Rear Fuel tank insecure |7.2.1| | 1 |
| Nearside Rear Fuel pipe leaking corroded through due to fuel tank insecure and stretching pipes |7.2.3| | 1 |
| Emissions not tested |7.3.A.1| | 1 |
| Nearside Front coil spring broken |2.4.C.1a| | 1 |
| Centre Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Anti-lock braking system warning lamp indicates an ABS fault | 1 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Fuel pipe union leaking excessively or a risk of fire Metal pipe into tank (6.1.3 (b) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure is so deformed it is likely to adversely affect braking or steering Leaf spring area (6.1.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure is so deformed it is likely to adversely affect braking or steering Leaf spring area (6.1.1 (a) (ii)) | 1 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Centre Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Centre Power steering pipe|s| or hose|s| leaking Power steering pump to rear rack joint |2.3.3b| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Rear Brake cable insecure | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill /step |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill/ step |6.2.2 |d| |i|| | 1 |
| Brake lever has insufficient reserve travel parking brake |1.1.2 |a|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Position lamp switch does not illuminate the front and rear position lamps with a single operation |1.1.A.2| | 1 |
| Front brake excessively fluctuating | 1 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Main beam `tell-tale` not working adversely affected by the operation of other lamps and is permanently illuminated when not on main beam. |1.7.4c| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Boot lid cannot be secured in the closed position (6.2.1 (e)) | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn both front drop links (5.3.4 (a) (i)) | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn both front d bushes (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills hold (5.3.6 (a) (i)) | 1 |
| Nearside Front Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
| Offside Front Road wheel fixing loose (5.2.1 (a) (i)) | 1 |
| Front Anti-roll bar ball joint excessively worn nsf and osf (5.3.4 (a) (i)) | 1 |
| Nearside Rear Fuel hose leaking to tank (6.1.3 (b) (i)) | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Central Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear Rear fog lamp does not emit a steady red light not working (4.5.4 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Front Service brake excessively fluctuating both front disc (1.2.1 (e)) | 1 |
| Nearside Front Lower Suspension unit modified so that its function is seriously affected ball joint welded in (5.3.5 (b) (ii)) | 1 |
| Offside Front Lower Suspension unit modified so that its function is affected ball joint welded in (5.3.5 (b) (i)) | 1 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement both d bushes |2.4.G.2| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Front Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii)) | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Driver`s airbag obviously inoperative |7.1.5 |c|| | 1 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
| Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Front Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Power steering component|s| leaking from a failed joint |2.3.3b| | 1 |
| Offside Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Front Headlamp not working on main beam x2 (4.1.1 (a) (ii)) | 1 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Central Lower Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Windscreen wiper not working (3.4 (a)) | 1 |
| Central Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively damaged significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Offside Windscreen wiper not working (3.4 (a)) | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Centre Fuel system component leaking fuel filter |7.2.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Outer Sill Corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer Sill Corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Power steering component|s| leaking |2.3.3b| | 1 |
| Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |