Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Registration plate lamp issues | 5 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Rear parking brake recording little or no effort | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
Rear fog lamp not working |1.3.2b| | 3 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Nearside Battery insecure |1.9.1| | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Brakes imbalanced across an axle | 2 |
Headlamp aim out of alignment | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front Seat belt stitching badly frayed |5.2.2b| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake pipe excessively corroded | 2 |
Nearside Front Body has a sharp edge caused by damage bumper |6.1.C.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded X2 |2.4.A.3| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Front Seat belt stitching badly frayed |5.2.2b| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear brake binding | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Rear brake application uneven | 1 |
Offside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Rear Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Excessive corrosion within 30cm of front spring mounting |6.1.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Excessive corrosion within 30cm of front spring mounting |6.1.A.1| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded inner inside door |5.2.6| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded front spring mount |2.4.A.3| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded front spring |2.4.A.3| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded front pf spring |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring |2.4.A.3| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panel to chassis |6.1.B.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |