Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 97 |
Headlamp aim out of alignment | 53 |
Registration plate lamp issues | 51 |
Offside Rear fog lamp not working |1.3.2b| | 28 |
Rear fog lamp not working |1.3.2b| | 28 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
Brake pipe excessively corroded | 20 |
Offside Front position lamp|s| not working |1.1.A.3b| | 19 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 17 |
Exhaust has a major leak of exhaust gases |7.1.2| | 15 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 14 |
Nearside Stop lamp not working |1.2.1b| | 14 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 13 |
Nearside Rear brake disc contaminated by oil |3.5.1h| | 12 |
Offside Rear fog lamp missing |1.3.2a| | 12 |
Offside Rear Rear fog lamp not working |1.3.2b| | 12 |
Offside Stop lamp not working |1.2.1b| | 12 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 11 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 11 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 11 |
Nearside Steering rack gaiter split |2.2.D.2d| | 10 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Parking brake lever has no reserve travel |3.1.6b| | 9 |
Brakes imbalanced across an axle | 9 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 9 |
Rear fog lamp tell tale not working |1.3.1b| | 8 |
Registration plate issues | 8 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 8 |
Rear parking brake recording little or no effort | 7 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 7 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 7 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 7 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 7 |
Offside front brake binding |3.7.B.1| | 7 |
Horn not working |1.6.2a| | 7 |
Power steering component|s| leaking |2.3.3b| | 7 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 6 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 6 |
Emissions not tested |7.0| | 6 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 6 |
Offside Steering rack gaiter split |2.2.D.2d| | 6 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 5 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 5 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 5 |
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 5 |
Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 5 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 5 |
Rear Rear fog lamp not working |1.3.2b| | 5 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 5 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Parking brake: efficiency below requirements |3.7.C.1b| | 4 |
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 4 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
Rear fog lamp emits a light other than red |1.3.2e| | 4 |
Mechanical brake component has restricted free movement | 4 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Offside Rear fog lamp insecure |1.3.2a| | 4 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 4 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 4 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 4 |
Battery insecure |1.9.1| | 4 |
Offside Headlamp not working on dipped beam |1.7.5a| | 4 |
Fuel system component leaking |7.2.3| | 4 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 4 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 4 |
Nearside front brake binding |3.7.B.1| | 4 |
Offside Rear Rear fog lamp missing |1.3.2a| | 3 |
Rear fog lamp insecure |1.3.2a| | 3 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 3 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 3 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear fog lamp missing |1.3.2a| | 3 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 3 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 3 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 3 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 3 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Rear Mechanical brake component has restricted free movement | 3 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 3 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 3 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 3 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 3 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Rear fog lamp switch missing |1.3.1a| | 3 |
Offside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 3 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 2 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 2 |
Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 2 |
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
Offside Front front brake binding |3.7.B.1| | 2 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Windscreen washer not working | 2 |
Offside Rear Anti-roll bar insecure |2.4.G.1| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Rear Brake disc contaminated (1.1.14 (b)) | 2 |
Nearside Front Shock absorbers has a serious fluid leak | 2 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Wheel nut|s| missing |4.2.A.1e| | 2 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
All position lamps not working |1.1.A.3b| | 2 |
Front Fuel system component leaking |7.2.3| | 2 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 2 |
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
Windscreen has damage | 2 |
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 2 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Nearside Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 2 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
Nearside Front Wheel nut|s| missing |4.2.A.1e| | 2 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
Driver`s seat insecure |6.2.A.1| | 2 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Statutory seat belt missing |5.1.1| | 2 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Offside Front Power steering component|s| leaking |2.3.3b| | 2 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
Rear fog lamp switch faulty |1.3.1a| | 2 |
Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 2 |
Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 2 |
Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 2 |
Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 2 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 2 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake lever has no reserve travel (3.1.6b) | 2 |
Nearside Inner Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |