MOT History from tests of petrol FERRARI 512s year 1995

Review the list of common FERRARI 512 failures below or to perform a specific mot history check on your FERRARI then use our popular KnowYourCar service

mot history

Pass percent:90.91%

(The average a petrol FERRARI 512 year 1995 passes without issue)

Based on:242 MOT Tests

Most common failures	No# failures
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	6
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	3
Registration plate issues	3
Headlamp aim out of alignment	2
Windscreen wiper does not clear the windscreen effectively	2
Exhaust emissions hydrocarbon content after 2nd fast idle excessive \|7.3.D.3\|	2
Stop lamp\|s\| all not working \|4.3.1 \|a\| \|iii\|\|	1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits \|8.2.1.2 \|b\|\|	1
Rear fog lamp missing \|1.3.2a\|	1
Rear fog lamp switch missing \|1.3.1a\|	1
Rear fog lamp tell tale missing \|1.3.1b\|	1
Braking system leaking hose offside rear \|3.6.A.1\|	1
Brake pipe excessively corroded	1
Nearside Side repeater not working \|1.4.A.2c\|	1
Rear fog lamp not working \|1.3.2b\|	1
Brakes imbalanced across an axle	1
Offside Rear fog lamp missing \|1.3.2a\|	1
Offside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Nearside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Emissions not tested Dense smoke emmitted \|7.4.B.1\|	1
Nearside Outer Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Outer Stop lamp not working \|1.2.1b\|	1
Offside Inner Front Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Front Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Rear Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Brake hose has insufficient room to move	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	1
Stop lamp(s) all not working (4.3.1 (a) (iii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	6
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	3
Registration plate issues	3
Headlamp aim out of alignment	2
Windscreen wiper does not clear the windscreen effectively	2
Exhaust emissions hydrocarbon content after 2nd fast idle excessive \|7.3.D.3\|	2
Stop lamp\|s\| all not working \|4.3.1 \|a\| \|iii\|\|	1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits \|8.2.1.2 \|b\|\|	1
Rear fog lamp missing \|1.3.2a\|	1
Rear fog lamp switch missing \|1.3.1a\|	1
Rear fog lamp tell tale missing \|1.3.1b\|	1
Braking system leaking hose offside rear \|3.6.A.1\|	1
Brake pipe excessively corroded	1
Nearside Side repeater not working \|1.4.A.2c\|	1
Rear fog lamp not working \|1.3.2b\|	1
Brakes imbalanced across an axle	1
Offside Rear fog lamp missing \|1.3.2a\|	1
Offside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Nearside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Emissions not tested Dense smoke emmitted \|7.4.B.1\|	1
Nearside Outer Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Outer Stop lamp not working \|1.2.1b\|	1
Offside Inner Front Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Front Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Rear Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Brake hose has insufficient room to move	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	1
Stop lamp(s) all not working (4.3.1 (a) (iii))	1

MOT History from tests of petrol FERRARI 512s year 1995

Find us on Facebook