MOT History from tests of petrol ENFIELD BULLETs year 1992

Review the list of common ENFIELD BULLET failures below or to perform a specific mot history check on your ENFIELD then use our popular KnowYourCar service

mot history

Pass percent:88.21%

(The average a petrol ENFIELD BULLET year 1992 passes without issue)

Based on:246 MOT Tests

Most common failures	No# failures
Registration plate issues	3
Headlamp aim out of alignment	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear reflector missing (4.8.2 (a) (ii))	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Registration plate lamp issues	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))	1
Rear Direction indicators not working \|1.5.1c\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Front Footrest insecure \|6.2.1a\|	1
Horn not working (7.7 (a) (ii))	1
Front Fuel system component leaking (6.1.3 (b) (i))	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Offside Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	1
Floor brake test Neither brake control achieves an efficiency of 25% \|3.3.C1b\|	1
Headlamp aim beam image kick-up is to the offside \|1.6.1\|	1
Fuel cap sealing washer torn \|7.2.2c\|	1
Horn not working \|1.7.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake clevis joint insecure (1.1.15 (c))	1
Rear Position lamp not working (4.2.1 (a))	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Rear Position lamp not working \|4.2.1 \|a\|\|	1
Stop lamp not working from front brake \|4.3.1 \|a\| \|ii\|\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	3
Headlamp aim out of alignment	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear reflector missing (4.8.2 (a) (ii))	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Registration plate lamp issues	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))	1
Rear Direction indicators not working \|1.5.1c\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Front Footrest insecure \|6.2.1a\|	1
Horn not working (7.7 (a) (ii))	1
Front Fuel system component leaking (6.1.3 (b) (i))	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Offside Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	1
Floor brake test Neither brake control achieves an efficiency of 25% \|3.3.C1b\|	1
Headlamp aim beam image kick-up is to the offside \|1.6.1\|	1
Fuel cap sealing washer torn \|7.2.2c\|	1
Horn not working \|1.7.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake clevis joint insecure (1.1.15 (c))	1
Rear Position lamp not working (4.2.1 (a))	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Rear Position lamp not working \|4.2.1 \|a\|\|	1
Stop lamp not working from front brake \|4.3.1 \|a\| \|ii\|\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1

MOT History from tests of petrol ENFIELD BULLETs year 1992

Find us on Facebook