Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Front Headlamp aim beam image kick up to the offside |1.6| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Registration plate issues | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Throttle operating incorrectly Sticking on lock right (6.2.7 (a) (i)) | 1 |
Rear Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Brake performance not tested Due to excessive brake binding (1.2.1 (g)) | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Offside Rear Brake master cylinder defective but brake still operating Rear brake action spongy (1.1.10 (b) (i)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Registration plate lamp issues | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Centre Front Upper Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear switch |1.3.1a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |