Most common failures | No# failures |
---|
Headlamp aim out of alignment | 45 |
Rear reflector on motorcycle missing |1.4.1| | 40 |
Registration plate issues | 19 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Registration plate lamp issues | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 5 |
Nearside Front Direction indicators not working |1.5.1c| | 5 |
Rear Position lamp not working (4.2.1 (a)) | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Horn not working |1.7.3a| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Fuel tank leaking |7.2.1a| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Stop lamp not working From front control (4.3.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Nearside Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Shock absorber insecurely attached TOP MOUNT |5.3.2 |a| |i|| | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock LOCK STOP DAMAGED |2.1.4 |b|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Direction indicator obviously incorrectly positioned less than 180mm apart |4.4.3 |a|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock handguard fouling fairings |2.1.4 |b|| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
An item not tested |Manual| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear brake binding | 1 |
Headlamp aim not tested |1.6| | 1 |
Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
Rear Brake excessively binding master cylinder seized |1.2.1 |f|| | 1 |
Rear Footrest missing both rear foot rests missing (6.2.12 (a)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Throttle control functioning such that safe operation of the motorcycle is adversely affected Sticking On Full Lock (6.2.7 (a) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock hand guard (2.1.4 (b)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Brake component insecure (1.1.21 (c)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Central Front Upper Front position lamp does not illuminate immediately when switched on Bulb Replaced |1.1.3a| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak BOTH (5.3.2 (b)) | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake component insecure brake pedal pivot retaining clip missing (1.1.21 (c)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Drive belt so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Brake pedal so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
Rear reflector on motorcycle missing missing reflector |1.4.1| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies brake light bulb |1.3.1a| | 1 |
Direction indicators not working o/s indicator bulb |1.5.1c| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Front wheel insecure |4.2.3b| | 1 |
Front suspension assembly component cracked |2.3.1| | 1 |