Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 37 |
Headlamp aim out of alignment | 28 |
Registration plate issues | 27 |
Registration plate lamp issues | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Horn not working |1.7.3a| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Steering lock stop maladjusted |2.1.3| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Rear Brake cylinder has no reserve travel and braking performance affected foot brake no reserv travel |1.1.16 |e| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii|| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock handlebar fouling fuel tank (2.1.4 (b)) | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator obviously incorrectly positioned according to special notice 9-2018 |4.4.3 |a|| | 1 |
Nearside Rear Direction indicator obviously incorrectly positioned according to special notice 9-2018 |4.4.3 |a|| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Rear position lamp does not illuminate immediately when it is switched on number plate |1.1.3a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Direction indicator incorrect colour lens missing |4.4.3 |a|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp brake light |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp brake light |1.5.1c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking petrol tank insecure and catching handlebarbswitches |6.1.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Front Steering operation fouling on the fuel tank or bodywork on full lock Top yoke just touches fuel tank (2.1.4 (b)) | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Handlebar restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |