Most common failures | No# failures |
---|
Registration plate issues | 11 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Headlamp aim out of alignment | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Registration plate lamp issues | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Steering lock stop maladjusted |2.1.3| | 2 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake pedal switch |1.3.1a| | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Horn likely to be confused with an emergency vehicle siren (7.7 (c) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Central Rear Upper Rear position lamp does not illuminate immediately when it is switched on Rear Lamp Bulb Changed |1.1.3a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Brake lever pivot has excessive free play REAR BRAKE (1.1.1 (b)) | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn not working |1.7.3a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |