| Most common failures | No# failures |
|---|
| Registration plate issues | 21 |
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Headlamp aim out of alignment | 14 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 9 |
| Rear reflector missing (4.8.2 (a) (ii)) | 8 |
| Stop lamp remains on when the brakes are released | 6 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 2 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Registration plate lamp issues | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Offside Front Upper Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Direction indicators not working all indicators do not illuminate properly |1.5.1c| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake performance not tested Rear brake NOT working |1.2.1 |g|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level below level and leaking (1.1.10 (d) (ii)) | 1 |
| Front Brake fluid significantly below minimum mark front reservoir leaking (1.1.10 (d) (ii)) | 1 |
| Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition baffel fitted (8.1.1 (a)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort 25kgF (1.2.1 (e)) | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |