| Most common failures | No# failures |
|---|
| Registration plate issues | 17 |
| Rear reflector missing (4.8.2 (a) (ii)) | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 11 |
| Registration plate lamp issues | 4 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 4 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 3 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 3 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Horn not working intermittent (7.7 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Brake pedal has insufficient reserve travel hits exhaust (1.1.2 (a)) | 1 |
| Rear All direction indicators obviously incorrectly positioned Distance between illuminated portions clearly less than minimum distance of 180mm (4.4.3 (a)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Horn not working intermittent (7.7 (a)) | 1 |
| Front Brake lagging in operation No bite on initial application, suspect air in system (1.2.1 (d)) | 1 |
| Rear All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Rear Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Nearside Front Footrest insecure safety "E" clip missing off clevis pin (6.2.12 (a)) | 1 |
| Offside Front Footrest insecure Safety "E" clip missing off clevis pin (6.2.12 (a)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock Missing steering stop on offside bottom yoke allowing forks to foul radiator (2.1.4 (b)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls rear brake pedal / switch (4.3.2 (a) (iii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake lever has restricted free movement fouling exhaust (1.1.15 (e)) | 1 |
| Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Offside Front Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Rear Brake has no recorded effort at a wheel Rear brake needed bleeding.. (1.2.1 (a) (ii)) | 1 |
| Rear Brake effort inadequate at a wheel brake has fading pressure at mastercylinder (1.2.1 (a) (i)) | 1 |
| Headlamp aim out of alignment | 1 |
| Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |