Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Registration plate issues | 26 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Registration plate lamp issues | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Horn not working |1.7.3a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 4 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Centre Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear position lamp adversely affected by the operation of another lamp (1.1.3b) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Direction indicators not working rear offside |1.5.1c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls None operational front contol. (4.3.2 (a) (iii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort rear brake does not work |3.3.A1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Central Front Horn not working (7.7 (a) (ii)) | 1 |
Central Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Headlamp aim beam image kick up to the offside (1.6) | 1 |
Front Front wheel bearings have excessive free play (2.3.5b) | 1 |
Front Front wheel bearings are excessively rough (2.3.5b) | 1 |
Offside Rear Direction indicator obscured (1.5.1a) | 1 |
Nearside Rear Direction indicator obscured (1.5.1a) | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Direction indicators not working all of the indicators are not working |1.5.1c| | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |