Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate issues | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Horn not working |1.7.3a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp does not illuminate immediately a brake applies With front brake |1.3.1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Nearside Front Shock absorber has a serious fluid leak fork seal failed (5.3.2 (b)) | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies swich cleaned |1.3.1a| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear An item not tested |Manual| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Centre Front Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Upper Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |