Most common failures | No# failures |
---|
Headlamp aim out of alignment | 36 |
Registration plate issues | 21 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Drive chain excessively tight |6.2.1d| | 4 |
Horn not working |1.7.3a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Registration plate lamp issues | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake hose excessively twisted |3.2.B3a| | 1 |
Nearside Front Shock absorber has a serious fluid leak Fork seal (5.3.2 (b)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Brake locking device insecure |3.2.A1e| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Outer Front Upper Direction indicator not working |1.5.1c| | 1 |
Nearside Inner Front Lower Direction indicator not working |1.5.1c| | 1 |
Nearside Outer Front Horn sounds harsh or grating |1.7.3c| | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Offside Rear Direction indicator not working (1.5.1c) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Brake hose damaged | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Indicator switch defective |1.5.4| | 1 |
Nearside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Rear Stop lamp not working off front leaver / further investigation needed into switch (4.3.1 (a) (ii)) | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
Central Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Lower Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp not working Off the front brake lever |4.3.1 |a| |ii|| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Footrest insecure |6.2.1a| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Rear suspension component cracked |2.4.A.1a| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |