Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Registration plate issues | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Offside Front Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Brake fluid reservoir insecurely mounted Cap of reservoir hitting bolt on fairing mirrior! |3.2.B1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen no pattern |4.1.2 |a|| | 1 |
Rear position lamp adversely affected by the operation of another lamp indicators |1.1.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock left lock, engine cuts out |2.1.4| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake hose leaking |1.1.12 |c|| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Central Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
Central Front Dipswitch does not operate immediately when selected on main beam Pass switch inoperative |4.1.3 |b|| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls Wing Mirror (2.1.2b) | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering Hits Clocks (2.1.2a) | 1 |
Drive chain excessively loose (6.2.1d) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Steering operation impeded by a fairing FRONT BRAKE RESERVOIR FOULING |2.1.4 |e|| | 1 |