Most common failures | No# failures |
---|
Registration plate issues | 87 |
Headlamp aim out of alignment | 64 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 44 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 32 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Headlamp aim beam image kick up to the offside |1.6| | 21 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 18 |
Rear reflector on motorcycle missing |1.4.1| | 16 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
Front wheel bearings are excessively rough |2.3.5b| | 10 |
Registration plate lamp issues | 10 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 9 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 8 |
Front Headlamp aim beam image kick up to the offside |1.6| | 8 |
Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Stop lamp remains on when the brakes are released | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Nearside Front Direction indicator not working |1.5.1c| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Horn not working |1.7.3a| | 5 |
Nearside Front Direction indicators not working |1.5.1c| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Direction indicator not working |1.5.1c| | 4 |
Rear Footrest missing |6.2.1a| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Offside Front Direction indicators not working |1.5.1c| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 3 |
Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Headlamp aim not tested |1.6| | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Brake performance not tested |3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Front Direction indicator obscured |1.5.1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |