MOT History from tests of petrol DODGE MOTORs year 1997

Review the list of common DODGE MOTOR failures below or to perform a specific mot history check on your DODGE then use our popular KnowYourCar service

mot history

Pass percent:73.33%

(The average a petrol DODGE MOTOR year 1997 passes without issue)

Based on:30 MOT Tests

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	4
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	3
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Stop lamp(s) not working (4.3.1 (a) (ii))	1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))	1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))	1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre outer sill (6.2.2 (d) (i))	1
Offside Outer Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Rear fog lamp tell tale not working \|1.3.1b\|	1
Offside Headlamp aim aimed so that it dazzles other road users \|1.8.A.1a\|	1
Nearside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Offside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Headlamp not in a clean condition affecting beam image \|1.2.4a\|	1
Offside Headlamp not in a clean condition affecting beam image \|1.2.4a\|	1
Nearside Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Offside Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Offside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp insecure \|1.7.3\|	1
Offside Headlamp excessively damaged so that the light output is severely reduced \|1.7.5a\|	1
Offside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Headlamp aim out of alignment	1
Registration plate lamp issues	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	4
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	3
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Stop lamp(s) not working (4.3.1 (a) (ii))	1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))	1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))	1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre outer sill (6.2.2 (d) (i))	1
Offside Outer Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Rear fog lamp tell tale not working \|1.3.1b\|	1
Offside Headlamp aim aimed so that it dazzles other road users \|1.8.A.1a\|	1
Nearside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Offside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Headlamp not in a clean condition affecting beam image \|1.2.4a\|	1
Offside Headlamp not in a clean condition affecting beam image \|1.2.4a\|	1
Nearside Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Offside Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Offside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp insecure \|1.7.3\|	1
Offside Headlamp excessively damaged so that the light output is severely reduced \|1.7.5a\|	1
Offside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Headlamp aim out of alignment	1
Registration plate lamp issues	1

MOT History from tests of petrol DODGE MOTORs year 1997

Find us on Facebook