Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 6 |
Rear parking brake recording little or no effort | 5 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
Headlamp aim out of alignment | 4 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 3 |
Brakes imbalanced across an axle | 3 |
Registration plate issues | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Nearside Inner Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Inner Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear fog lamp switch insecure |1.3.1a| | 1 |
Nearside Side repeater missing |1.4.A.2b| | 1 |
Offside Side repeater missing |1.4.A.2b| | 1 |
Centre Upper Stop lamp not working |1.2.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Front brake application uneven | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Side repeater not working both |1.4.A.2c| | 1 |
Nearside Front Braking system leaking calipar |3.6.A.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear brake binding | 1 |
Spare wheel insecure |6.4.2| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Windscreen wiper blade insecure | 1 |
Power steering malfunctioning |2.1.5 |a|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded/ holed |5.3.6 |a| |i|| | 1 |
Nearside Front position lamp|s| missing |1.1.A.3a| | 1 |
Nearside Front position lamp|s| insecure |1.1.A.3a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Nearside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
front brakes release unevenly |3.7.B.4| | 1 |
Offside Front Side repeater not working |4.4.1 |a| |ii|| | 1 |
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt upper boot no longer prevents the ingress of dirt/water (5.3.4 (b) (ii)) | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower arm ball joint dust cover no longer prevents the ingress of dirt/water (5.3.4 (b) (ii)) | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Side repeater not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Spare wheel insecure in carrier (6.1.5 (b) (i)) | 1 |