Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Drive chain worn to excess |6.2.1e| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Headlamp aim out of alignment | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Registration plate issues | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Handlebar deformed |2.1.1b| | 2 |
Front position lamp does not illuminate immediately when switched on low beam |1.1.3a| | 1 |
Front Drive chain sprocket worn to excess front and rear |6.2.1e| | 1 |
Brake master cylinder severely damaged master cylinder damaged |3.2.B1b| | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Horn not working |1.7.3a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies Front control |1.3.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Handlebar grip missing |2.2.1 |d| |i|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Chain guard insecure |6.1.7 |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies when apply brake position one light doesn`t work |1.3.1a| | 1 |
Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired bulb fitted wrong |1.2.3a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Registration plate lamp issues | 1 |
Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
Front Brake caliper damaged (1.1.16 (a) (i)) | 1 |
Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |
Rear Brake disc insecure (1.1.14 (a) (ii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Central Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Brake performance not tested (1.2.1 (g)) | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Shock absorber has a serious fluid leak nearside fork seal leaking |5.3.2 |b|| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Front suspension assembly component missing |2.3.1| | 1 |
Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Brake cylinder insecure bolt missing (1.1.16 (c) (i)) | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Motorcycle structure cracked |6.1.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Direction indicator insecure |1.5.3b| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal has insufficient reserve travel air in system fading under pressure (1.1.2 (a)) | 1 |
Rear Brake effort inadequate at a wheel air in system (1.2.1 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake lever insecure |3.1.2a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |