Most common failures | No# failures |
---|
Rear reflector missing (4.8.2 (a) (ii)) | 15 |
Registration plate issues | 7 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Drive chain excessively loose (6.1.7 (c) (i)) | 5 |
Headlamp aim out of alignment | 4 |
Stop lamp remains on when the brakes are released | 4 |
Horn not working (7.7 (a) (ii)) | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
Registration plate lamp issues | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Nearside All direction indicators not working intermittant operation (4.4.1 (a) (ii)) | 1 |
Position lamp missing (4.2.1 (a)) | 1 |
Fuel cap ineffective no seal (6.1.3 (b) (i)) | 1 |
Suspension component attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
Horn not working (7.7 (a)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam High beam doesnt switch off (4.1.3 (b)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Nearside Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Central Front Exhaust system insecure Bolts missing on join (6.1.2 (a)) | 1 |
Central Rear Stop lamp not working Stop lamp goes off when brakes pressed. (4.3.1 (a) (ii)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Suspension arm attachment bracket/mounting insecure swingarm (5.3.3 (a) (i)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Suspension arm attachment bracket/mounting insecure swing arm (5.3.3 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Drive chain sprocket worn to excess Front / Rear (6.1.7 (c) (i)) | 1 |
Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp missing brake switch (4.3.1 (a) (ii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Brake pedal pivot excessively worn (1.1.1 (b)) | 1 |
Front Brake master cylinder insecure mounting snapped (1.1.10 (c)) | 1 |