| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 53 |
| Rear reflector on motorcycle missing |1.4.1| | 40 |
| Registration plate issues | 20 |
| Rear reflector missing (4.8.2 (a) (ii)) | 19 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
| Drive chain worn to excess |6.2.1e| | 10 |
| Horn not working |1.7.3a| | 9 |
| Registration plate lamp issues | 9 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 8 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 6 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 6 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Horn not working (7.7 (a) (ii)) | 5 |
| Horn not working |7.7 |a| |ii|| | 4 |
| Horn not working (7.7 (a)) | 4 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Nearside Rear Direction indicators not working |1.5.1c| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 4 |
| Stop lamp remains on when the brakes are released | 4 |
| Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 4 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| All direction indicators missing (4.4.1 (a) (ii)) | 3 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Offside Rear Footrest missing (6.2.12 (a)) | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 2 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 2 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Offside Motorcycle structure is so deformed it is likely to adversely affect braking or steering footrest (6.1.1 (a) (ii)) | 2 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Horn not working |7.7 |a| |ii|| | 2 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Wheel bearing has excessive play also rough when rotated (5.1.3 (a) (i)) | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Stop lamp not working Switch Missing |4.3.1 |a| |ii|| | 1 |
| Nearside Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Front Wheel fixing loose (single fixing) NUT ON FRONT WHEEL SPINDLE VERY LOOSE (5.2.1 (a) (ii)) | 1 |
| Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Nearside Drive chain worn to excess WORN ALSO SEIZED LINKS (6.1.7 (c) (i)) | 1 |
| Rear Wheel hub excessively damaged BROKEN SPROCKET BOLT OR MISSING (5.2.1 (b) (i)) | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Drive chain excessively loose rear sprocket loose. |6.2.1d| | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear wheel axle split pin |6.2.1h| | 1 |
| Rear Direction indicator not working Both (4.4.1 (a) (ii)) | 1 |
| Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Stop lamp not working from control 2 foot pedal (4.3.1 (a) (ii)) | 1 |
| Rear Lower Shock absorber has an excessively worn bush marked yellow (5.3.2 (c)) | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Front Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Plate brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Rear Position lamp lens seriously defective (4.2.1 (b)) | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Front Brake hose leaking (1.1.12 (c)) | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Rear Direction indicator likely to become detached insecure |4.4.1 |c| |ii|| | 1 |
| Rear Brake effort inadequate at a wheel brake failed to lock rollers or give sufficient braking capacity |1.2.1 |a| |i|| | 1 |
| Rear Brake pedal insecure |1.1.2 |e| |i|| | 1 |
| Rear Brake pedal pivot has excessive free play |1.1.1 |b|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Lower Suspension component ball joint excessively worn shock pivot bush worn |5.3.4 |a| |i|| | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Headlamp insecure no beam pattern |4.1.1 |c|| | 1 |
| Upper Fork yoke modification unsafe nut insecure |2.2.2 |e|| | 1 |
| Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Stop lamp not working Footbrake (4.3.1 (a) (ii)) | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment Handbrake lever hits handlebar grip (1.1.15 (f)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition Non standard exhaust fitted (8.1.1 (a)) | 1 |
| Stop lamp not working Handbrake (4.3.1 (a) (ii)) | 1 |
| Steering operation restricted in free movement from lock to lock Electric cable / sleeve stopping lock to lock movement (2.1.4 (c)) | 1 |
| Horn sound not in accordance with requirements Unable to hear horn over exhaust noise (7.7 (c)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls foot control (4.3.2 (a) (iii)) | 1 |
| Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Wheel bearing play so excessive it is likely to break up L/H/R wheel bearing very worn |5.1.3 |a| |ii|| | 1 |
| Drive chain excessively loose Adjust and lub |6.1.7 |c| |i|| | 1 |
| Nearside Rear Direction indicator not working Fit bulb |4.4.1 |a| |ii|| | 1 |
| Motorcycle structure is so deformed it is likely to adversely affect braking or steering handlebars (6.1.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Throttle operating incorrectly throttle loose on bars |6.2.1f| | 1 |
| Horn missing |1.7.1| | 1 |
| Stop lamp remains on when the brake is released front lever fault |1.3.1e| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp wired up the wrong way |1.2.2c| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Drive chain worn to excess tight spots (6.1.7 (c) (i)) | 1 |
| Handlebar handgrip not secure to handlebars. l/h and r/h. |2.1.1c| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Lower suspension linkage bolt broken. |6.1.1c| | 1 |
| Nearside Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear Position lamp lens seriously defective Missing (4.2.1 (b)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
| Offside Rear Direction indicator obscured |1.5.1a| | 1 |
| Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls front stop switch not working (4.3.2 (a) (iii)) | 1 |
| Front Direction indicator lens defective such that the emitted light is adversely affected both front indicators flashing incorrectly (4.4.1 (b) (ii)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure rear fender insecure and sharp edges (6.1.1 (b) (i)) | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Steering headbearing has excessive wear or free play clonky (2.2.2 (f) (i)) | 1 |
| Rear Suspension arm pin or bush excessively worn shock l;inkage (5.3.4 (a) (i)) | 1 |
| Fuel tank leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
| Nearside Rear Footrest insecure |6.2.12 |a|| | 1 |
| Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
| Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies front switch not working |1.3.1a| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
| Stop lamp not working rear system (4.3.1 (a) (ii)) | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Front Exhaust mounting missing |7.1.1c| | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Footrest insecure springs fitted incorrectly. (6.2.12 (a)) | 1 |
| Wheel spindle locking device missing Chain adjusters loose (5.2.1 (d)) | 1 |
| Throttle operating incorrectly Throttle cable not working correctly. (6.2.7 (a) (i)) | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Wheel hub excessively worn |5.2.1 |b| |i|| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Front Exhaust system insecure (6.1.2 (a)) | 1 |
| Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Front Upper Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear Brake rod has restricted free movement |1.1.15 |e|| | 1 |
| Rear Brake component modification unsafe master cylinder rod lock nut missing rod at extreme angle |1.1.21 |d| |i|| | 1 |
| Rear suspension bush has excessive free play lower shock bush |2.4.A2a|i|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Split link fitted in wrong direction |6.2.1h| | 1 |
| Rear Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
| Nearside Rear Rear suspension bush has excessive free play swing arm bush. |2.4.A2a|i|| | 1 |
| Offside Rear Rear suspension bush has excessive free play swing arm. |2.4.A2a|i|| | 1 |
| Rear Footrest missing both (6.2.12 (a)) | 1 |
| Headlamp light intensity severely reduced on dipped beam (4.1.4 (a)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Wheel spindle locking device missing Snapped off (5.2.1 (d)) | 1 |
| Nearside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Rear Suspension arm pin or bush excessively worn swing arm bush/ bearings (5.3.4 (a) (i)) | 1 |
| Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
| Rear Brake pipe connection leaking (1.1.11 (b)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Footrest missing Both rear |6.2.1a| | 1 |
| Rear Brake master cylinder defective but brake still operating pedal creeps to end of travel (1.1.10 (b) (i)) | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Centre Front Upper Headlamp insecure |1.2.3b| | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Stop lamp not working switch operating incorrectly, light comes on then goes off as you continue to pull the lever (4.3.1 (a) (ii)) | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear reflector missing obscured by l-plate |4.8.2 |a| |ii|| | 1 |
| Stop lamp not working front brake applied (4.3.1 (a) (ii)) | 1 |
| Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp BOTH BEAMS ON TOGETHER |1.2.2c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition REPACK |7.1.2| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride ONE FRONT SPROCKET BOLT MISSING |6.2.1h| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Front Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Rear Brake cylinder leaking Master cylinder seal (1.1.16 (b) (i)) | 1 |
| Rear Brake has no recorded effort at a wheel Due to rear master cylinder leaking (1.2.1 (a) (ii)) | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| All direction indicators adversely affected by the operation of another lamp affected by rear lamp (4.4.3 (b)) | 1 |
| Stop lamp adversely affected by the operation of another lamp affected by indicators (4.3.3 (b)) | 1 |
| Position lamp adversely affected by the operation of another lamp affected by indicators (4.2.3 (b)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on number plate light |1.1.3a| | 1 |
| Rear Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Brake lagging in operation (1.2.1 (d)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Drive chain horseshoe locking device incorrectly fitted back to front (6.1.7 (j) (i)) | 1 |
| Stop lamp not working front switch faulty (4.3.1 (a) (ii)) | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Horn not working |1.7.3a| | 1 |