| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 14 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Registration plate lamp issues | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Registration plate issues | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Horn not working |1.7.3a| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Fuel tank leaking at petcock (6.1.3 (b) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Handlebar deformed nearside bent backwards |2.1.1b| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Rear Brake fluid contaminated (1.8 (a)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Stop lamp does not illuminate immediately a brake applies from pedal |1.3.1a| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Shock absorber has a serious fluid leak BOTH FORK SEALS (5.3.2 (b)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Stop lamp not working front control |4.3.1 |a| |ii|| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Nearside Front Lower Brake disc contaminated (1.1.14 (b)) | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Central Rear Lower Position lamp not working (4.2.1 (a)) | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
| Front Position lamp missing |4.2.1 |a|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Brake hose connection leaking (1.1.12 (c)) | 1 |
| Rear Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Front Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake lever mounting cracked |3.1.2c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |