Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 27 |
Headlamp aim out of alignment | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Drive chain worn to excess |6.2.1e| | 9 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Horn not working |1.7.3a| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 4 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Offside Handlebar deformed |2.1.1b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Registration plate issues | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Direction indicator not working |1.5.1c| | 3 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Handlebar deformed |2.1.1b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Rear mono-shock pivot seized |2.4.B.4| | 2 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Exhaust mounting missing |7.1.1c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Rear Chain guard insecure |6.2.1c| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Handlebar deformed |2.1.1b| | 1 |
Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Footrest missing |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Outer Direction indicators not working |1.5.1c| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Front suspension assembly component missing |2.3.1| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Inner Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake fluid reservoir cap missing |3.2.B1c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake caliper operating mechanism has excessive travel |1.1.16 |e| |i|| | 1 |
Rear Brake cylinder operating mechanism has excessive travel |1.1.16 |e| |i|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Handlebar deformed |2.1.1b| | 1 |