Most common failures | No# failures |
---|
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Registration plate issues | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Horn not working |1.7.3a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Headlamp aim out of alignment | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever excessively damaged |3.2.A1c| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Fork yoke insecure (2.2.2 (d) (i)) | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Forks excessively corroded |2.2.2 |d| |i|| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |