Most common failures | No# failures |
---|
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Headlamp aim out of alignment | 4 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
Brakes imbalanced across an axle | 2 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Front Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
Offside Rear Shock absorber insecure |2.7.2b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Horn not working |1.6.2a| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Registration plate lamp issues | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Lower Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Front Exhaust mounting missing |7.1.1b| | 1 |
Nearside Inner Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Centre Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Headlamps matched pair are not the same size |1.7.6| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Side repeater not working |1.4.A.2c| | 1 |
Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Obligatory mirror missing |8.1.1| | 1 |
Offside Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Anti-roll bar attachment bracket/mounting weld cracked |2.4.G.1| | 1 |
Nearside Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Anti-roll bar attachment bracket inappropriately repaired |2.4.A.2| | 1 |
Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Rear Upper Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Rear Upper Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Rear Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Outer Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Front Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Steering rack excessively corroded and unserviceable |2.2.C.1d| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |