>

MOT History from tests of petrol DAIHATSU CUOREs year 2003

Review the list of common DAIHATSU CUORE failures below or to perform a specific mot history check on your DAIHATSU then use our popular KnowYourCar service

mot history
Pass percent:68.20%
(The average a petrol DAIHATSU CUORE year 2003 passes without issue)
Based on:1,242 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively113
Headlamp aim out of alignment80
Brake pipe excessively corroded61
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|28
Exhaust has a major leak of exhaust gases |7.1.2|26
Rear Exhaust has a major leak of exhaust gases |7.1.2|19
Registration plate issues17
Brakes imbalanced across an axle16
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|15
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|15
Registration plate lamp issues15
Emissions not tested |7.0|9
Horn not working |1.6.2a|9
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|8
Offside front brake binding |3.7.B.1|7
Offside Front front brake binding |3.7.B.1|7
Offside Front coil spring incomplete |2.4.C.1a|7
Offside Front Front position lamp|s| not working |1.1.A.3b|6
Offside Front coil spring fractured |2.4.C.1a|6
Mechanical brake component has restricted free movement6
Offside Stop lamp not working |1.2.1b|5
Offside Front position lamp|s| not working |1.1.A.3b|5
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))5
Nearside Stop lamp not working |1.2.1b|5
Front brake application uneven5
Offside Windscreen wiper blade deteriorated |8.2.2|5
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))5
Rear parking brake recording little or no effort5
Nearside Front position lamp|s| not working |1.1.A.3b|5
Offside Front coil spring broken |2.4.C.1a|4
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|4
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Nearside Windscreen wiper blade deteriorated |8.2.2|4
Offside Headlamp not working on dipped beam |1.7.5a|4
Nearside front brake binding |3.7.B.1|4
Nearside Rear Stop lamp not working |1.2.1b|4
Parking brake: efficiency below requirements |3.7.B.7|4
Nearside Front front brake binding |3.7.B.1|4
Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h||3
Rear fog lamp not working |1.3.2b|3
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|3
Exhaust has part of the system excessively deteriorated |7.1.1a|3
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|3
Nearside Front brake disc excessively pitted |3.5.1h|3
Offside Front brake disc excessively pitted |3.5.1h|3
Windscreen has damage3
Offside Rear Stop lamp not working |1.2.1b|3
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|3
Front front brake binding |3.7.B.1|3
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4|3
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3|3
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|3
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Exhaust system not adequately supported |7.1.1|2
Centre Exhaust has a major leak of exhaust gases |7.1.2|2
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))2
Offside Headlamp insecure |1.7.3|2
Front Exhaust has a major leak of exhaust gases |7.1.2|2
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1|2
Brake hose has insufficient room to move2
Nearside Rear Shock absorber has an excessively worn bush |2.7.4|2
Offside Rear Shock absorber has an excessively worn bush |2.7.4|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|2
Nearside Rear Rear wheel bearing has excessive play |2.6.2|2
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|2
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a|2
Horn not working |7.7 |a| |ii||2
Offside Front Front wheel bearing rough when rotated |2.5.A.2|2
Nearside Front coil spring fractured |2.4.C.1a|2
Offside Rear Rear fog lamp not working |1.3.2b|2
Offside Rear fog lamp not working |1.3.2b|2
Central Exhaust has a major leak of exhaust gases |7.1.2|2
Emissions not tested |7.3.A.1|2
Front brake disc in such a condition that it is seriously weakened2
Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c||2
Nearside Front Coil spring not correctly located |2.4.C.2|2
Service brake efficiency below requirements (1.2.2 (a) (i))2
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|2
Rear brake binding2
Brake hose excessively deteriorated2
Nearside Front Headlamp not working on dipped beam |1.7.5a|2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))2
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))2
Windscreen washer not working 2
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|2
Service brake: efficiency below requirements |3.7.B.7|2
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy