Most common failures | No# failures |
---|
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Brake hose excessively deteriorated | 4 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Brake pipe excessively corroded | 1 |
Nearside Front Macpherson strut cracked |2.4.G.1| | 1 |
Offside Front Macpherson strut cracked |2.4.G.1| | 1 |
Nearside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brakes imbalanced across an axle | 1 |
Windscreen has damage | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside front brake juddering severely |3.7.A.2b| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Headlamp aim out of alignment | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Front Fuel pipe leaking |7.2.3| | 1 |
Offside Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 1 |
Nearside Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 1 |
Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Nearside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Offside Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded floor section |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded box section |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded box section |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Registration plate lamp issues | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |