MOT History from tests of petrol DAIHATSU CHARADEs year 1983

Review the list of common DAIHATSU CHARADE failures below or to perform a specific mot history check on your DAIHATSU then use our popular KnowYourCar service

mot history

Pass percent:71.19%

(The average a petrol DAIHATSU CHARADE year 1983 passes without issue)

Based on:59 MOT Tests

Most common failures	No# failures
Rear brake binding	4
Brakes imbalanced across an axle	3
Brake hose excessively deteriorated	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside rear brake recording little or no effort \|3.7.B.5a\|	2
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Stub axle distorted \|2.5.A.5b\|	1
Registration plate lamp issues	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear rear brake recording little or no effort \|3.7.B.5a\|	1
Rear parking brake recording little or no effort	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Brake pipe excessively corroded	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Front Obligatory mirror insecure \|8.1.1\|	1
Nearside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Offside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Nearside Front Body has a sharp edge caused by damage bumper \|6.1.C.1\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of sill \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded rear of sill \|2.4.A.3\|	1
Registration plate issues	1
Nearside front brake binding \|3.7.B.1\|	1
Nearside Side repeater missing \|1.4.A.2b\|	1
Offside Side repeater missing \|1.4.A.2b\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Exhaust has a major leak of exhaust gases centre and rear silencers \|7.1.2\|	1
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear brake binding	4
Brakes imbalanced across an axle	3
Brake hose excessively deteriorated	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside rear brake recording little or no effort \|3.7.B.5a\|	2
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Stub axle distorted \|2.5.A.5b\|	1
Registration plate lamp issues	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear rear brake recording little or no effort \|3.7.B.5a\|	1
Rear parking brake recording little or no effort	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Brake pipe excessively corroded	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Front Obligatory mirror insecure \|8.1.1\|	1
Nearside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Offside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Nearside Front Body has a sharp edge caused by damage bumper \|6.1.C.1\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of sill \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded rear of sill \|2.4.A.3\|	1
Registration plate issues	1
Nearside front brake binding \|3.7.B.1\|	1
Nearside Side repeater missing \|1.4.A.2b\|	1
Offside Side repeater missing \|1.4.A.2b\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Exhaust has a major leak of exhaust gases centre and rear silencers \|7.1.2\|	1
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1

MOT History from tests of petrol DAIHATSU CHARADEs year 1983

Find us on Facebook