Most common failures | No# failures |
---|
Windscreen washer not working | 2 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Headlamp aim out of alignment | 2 |
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Brake performance not tested due to pad missing (1.2.1 (g)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 1.0 (8.2.1.2 (b)) | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/sill (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/sill (5.3.6 (a) (i)) | 1 |
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Offside Rear Rear fog lamp does not emit a steady red light white |4.5.4 |a|| | 1 |
Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Rear fog lamp switch missing (4.5.3 (a) (ii)) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Front brake application uneven | 1 |
Front brake excessively fluctuating | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded Shock Absorber |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded Shock Absorber |2.4.A.3| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear crossmember |6.1.B.2| | 1 |
Offside Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |