Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Riders seat insecure |6.2.1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Headlamp aim out of alignment | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Registration plate issues | 1 |
Nearside Rear Lower Brake linkage excessively corroded |3.2.A1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Registration plate lamp issues | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front position lamp does not face the front |1.1.1d| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Lower Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
An item not tested |Manual| | 1 |