| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 15 |
| Steering headbearing has excessive free play |2.2.2| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
| Stop lamp remains on when the brake is released |1.3.1e| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Registration plate issues | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Riders seat insecure |6.2.1a| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Horn not working |1.7.3a| | 3 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Registration plate lamp issues | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Nearside Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Nearside Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Brake lever attachment screws missing |3.1.2b| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Position lamp not working front and rear sidelights |4.2.1 |a|| | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| An item not tested |Manual| | 1 |
| Front An item not tested |Manual| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Rear Brake lever attachment screws loose |3.1.2b| | 1 |
| Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Rear Brake lever mounting insecure |3.1.2a| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Front Brake lever has insufficient reserve travel rear brake (1.1.2 (a)) | 1 |
| Rear reflector likely to become detached (4.8.1 (b) (ii)) | 1 |
| Front Brake lagging in operation (1.2.1 (d)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |