Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Registration plate lamp issues | 6 |
Brakes imbalanced across an axle | 4 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Headlamp insecure |1.7.3| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Headlamp insecure |1.7.3| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake pipe excessively corroded | 2 |
Lower Steering column flexible coupling is excessively deteriorated |2.1.5| | 2 |
Offside Rear Upper Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Registration plate issues | 2 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Side repeater not working |1.4.A.2c| | 2 |
Rear brake binding | 2 |
Battery insecure |1.9.1| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill, rear |6.2.2 |d| |i|| | 1 |
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill, middle and rear |6.2.2 |d| |i|| | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
Nearside Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Rear parking brake recording little or no effort | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Rear brake application uneven | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension top mount area |5.3.6 |a| |i|| | 1 |
Speedometer clearly inoperative |6.7.2| | 1 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
Nearside Side repeater incomplete |1.5.A1b| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Front Steering column shaft cracked and unserviceable |2.2.C.1d| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Front Body has a projection caused by damage |6.1.C.1| | 1 |
Lower Steering component fractured and unserviceable |2.2.C.1d| | 1 |
Rear Position lamp not working both sides (4.2.1 (a) (ii)) | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Emissions not tested |7.0| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Nearside Front Outer Torque/reaction arm has a deteriorated rubber bush resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Outer Torque/reaction arm has a deteriorated rubber bush resulting in excessive movement |2.4.G.2| | 1 |
Front Headlamp insecure |1.7.3| | 1 |
Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Rear Exhaust system not adequately supported MOUNTING SEPARATED |7.1.1| | 1 |
Bonnet cannot be secured in the closed position |8.4.1| | 1 |
Nearside Front brake disc contaminated by brake fluid |3.5.1h| | 1 |
Offside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
Vehicle Identification Number not permanently displayed |6.3.5.a| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Offside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Offside Rear Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |