MOT History from tests of petrol CITROEN PALLASs year 1974

Review the list of common CITROEN PALLAS failures below or to perform a specific mot history check on your CITROEN then use our popular KnowYourCar service

mot history

Pass percent:57.89%

(The average a petrol CITROEN PALLAS year 1974 passes without issue)

Based on:19 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	3
Nearside Rear Fluid suspension unit leaking \|2.4.D.2\|	2
Offside Rear wheel bearing rough when rotated \|2.6.1\|	2
Brakes imbalanced across an axle	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Driver`s seat insecure \|6.2.A.1\|	1
Braking system leaking \|3.6.A.1\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Front Direction indicators not working \|1.4.A.2c\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded sub frame \|2.4.A.3\|	1
Service brake efficiency below requirements (1.2.2 (a) (i))	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired \|5.2.6\|	1
Front Fluid suspension unit leaking \|2.4.D.2\|	1
Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Subframe mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Offside Front brake disc contaminated by grease \|3.5.1h\|	1
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))	1
Front Fluid suspension leaking \|2.4.D.2\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Registration plate lamp issues	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Fluid suspension unit deteriorated and likely to fail \|2.4.D.1b\|	1
Nearside front parking brake recording little or no effort \|3.7.B.6a\|	1
Offside front parking brake recording little or no effort \|3.7.B.6a\|	1
front brakes release unevenly \|3.7.B.4\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	3
Nearside Rear Fluid suspension unit leaking \|2.4.D.2\|	2
Offside Rear wheel bearing rough when rotated \|2.6.1\|	2
Brakes imbalanced across an axle	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Driver`s seat insecure \|6.2.A.1\|	1
Braking system leaking \|3.6.A.1\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Front Direction indicators not working \|1.4.A.2c\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded sub frame \|2.4.A.3\|	1
Service brake efficiency below requirements (1.2.2 (a) (i))	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired \|5.2.6\|	1
Front Fluid suspension unit leaking \|2.4.D.2\|	1
Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Subframe mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Offside Front brake disc contaminated by grease \|3.5.1h\|	1
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))	1
Front Fluid suspension leaking \|2.4.D.2\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Registration plate lamp issues	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Fluid suspension unit deteriorated and likely to fail \|2.4.D.1b\|	1
Nearside front parking brake recording little or no effort \|3.7.B.6a\|	1
Offside front parking brake recording little or no effort \|3.7.B.6a\|	1
front brakes release unevenly \|3.7.B.4\|	1

MOT History from tests of petrol CITROEN PALLASs year 1974

Find us on Facebook