| Most common failures | No# failures |
|---|
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Registration plate lamp issues | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Headlamp aim beam image kick up to the offside (1.8) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3) | 1 |
| Front An item not tested (Manual) | 1 |
| Nearside Rear brake drum contaminated by brake fluid (3.5.1h) | 1 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear brake binding | 1 |
| Brake pipe excessively corroded | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Headlamp aim out of alignment | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Rear brake application uneven | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Battery insecure |1.9.1| | 1 |
| Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Registration plate issues | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Steering component fractured and unserviceable |2.2.C.1d| | 1 |
| Offside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |