Most common failures | No# failures |
---|
Registration plate lamp issues | 137 |
Windscreen wiper does not clear the windscreen effectively | 78 |
Headlamp aim out of alignment | 57 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 11 |
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 10 |
Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 10 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 9 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 9 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 8 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 8 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 7 |
Registration plate issues | 6 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 5 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 5 |
Electronic parking brake warning indicates a malfunction (1.1.6 (e)) | 4 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 4 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 4 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
Windscreen washer not working | 3 |
Electronic parking brake control defective so that it cannot be satisfactorily operated (1.1.6 (d)) | 3 |
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
Brakes imbalanced across an axle | 3 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d)) | 3 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 3 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
Rear brake disc in such a condition that it is seriously weakened | 3 |
Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 3 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Front brake excessively fluctuating | 2 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 2 |
Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 2 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Rear Brake cable insecure | 2 |
Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Anti-lock braking system warning lamp indicates an ABS fault | 2 |
Electronic stability control warning lamp indicates a fault (7.12 (e)) | 2 |
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |