| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Brake pipe excessively corroded | 6 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
| Registration plate issues | 4 |
| Nearside Side repeater not working |1.4.A.2c| | 4 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Side repeater not working |1.4.A.2c| | 3 |
| Offside front brake binding |3.7.B.1| | 3 |
| Brake hose excessively deteriorated | 3 |
| Registration plate lamp issues | 2 |
| Offside Front Headlamp insecure |1.7.3| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Offside Headlamp insecure |1.7.3| | 2 |
| Brakes imbalanced across an axle | 2 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 2 |
| Brake load sensing valve linkage seized |3.6.E.3| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Nearside Headlamp insecure |1.7.3| | 2 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Offside Front coil spring cracked |2.4.C.1a| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Outer Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Front brake application uneven | 1 |
| Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Side repeater not working |1.4.A.2c| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Front brake disc excessively pitted |3.5.1h| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Brake pedal creeps down under servo assistance and touches the floor |3.3.C.3| | 1 |
| Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Nearside Front Headlamp insecure |1.7.3| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Rear Spare wheel insecure |6.4.2| | 1 |
| Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Windscreen has damage | 1 |
| Nearside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |