Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Windscreen wiper does not clear the windscreen effectively | 7 |
Brake hose excessively deteriorated | 6 |
Brakes imbalanced across an axle | 5 |
Registration plate lamp issues | 4 |
Rear parking brake recording little or no effort | 4 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 3 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
Nearside Front Headlamp insecure |1.7.3| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Brake pipe excessively corroded | 2 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Offside Headlamp insecure |1.7.3| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Nearside Headlamp insecure |1.7.3| | 2 |
Registration plate issues | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Headlamp aim beam image too far to the right |1.6.B4| | 1 |
Offside Front front brake juddering severely |3.7.A.2b| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Front An item not tested |Manual| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Side repeater not working |1.4.A.2c| | 1 |
Nearside Rear Trailing arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Nearside Front brake caliper has restricted free movement |3.5.1k| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Mechanical brake component has restricted free movement | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
Front Brake hose excessively damaged |3.6.B.4d| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Headlamp insecure |1.7.3| | 1 |
Nearside Rear Headlamp insecure |1.7.3| | 1 |
Offside Rear Headlamp insecure |1.7.3| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Steering rack gaiter missing |2.2.D.2d| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
Offside Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Nearside Front Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |