Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Headlamp aim out of alignment | 3 |
Registration plate lamp issues | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside front parking brake recording little or no effort |3.7.B.6a| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front brake disc contaminated by oil |3.5.1h| | 2 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 2 |
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 2 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Exhaust fumes entering cabin (6.1.2 (b) (i)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp Brake and side affected by each other (4.3.3 (b)) | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front front parking brake recording little or no effort |3.7.B.6a| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Registration plate issues | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside front parking brake recording little or no effort |3.7.B.6a| | 1 |
Offside front brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |