Most common failures | No# failures |
---|
Registration plate lamp issues | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Headlamp aim out of alignment | 6 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Horn not working |1.6.2a| | 3 |
Horn not working (7.7 (a) (ii)) | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Centre Stop lamp not working |1.2.1b| | 1 |
Offside Front Brake cable damaged Handbrake cable front section broke. (1.1.15 (a)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Rear All position lamps not working |1.1.A.3b| | 1 |
Offside Rear All position lamps not working |1.1.A.3b| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 1 |
Nearside Rear Outline marker lamp not working |4.2.1 |a|| | 1 |
Offside Rear Outline marker lamp not working |4.2.1 |a|| | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases downpipe rotted through,emissions test may not be accurate (6.1.2 (a)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Windscreen wiper blade insecure | 1 |
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at back of door under trim |6.1.B.2| | 1 |
Mechanical brake component has restricted free movement | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Upper Outline marker lamp not working |4.2.1 |a| |ii|| | 1 |
Offside Rear Upper Outline marker lamp not working |4.2.1 |a| |ii|| | 1 |
Brake hose excessively deteriorated | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Rear brake binding | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded jacking point area |2.4.A.3| | 1 |
Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner wheel arch strut top mounting area |2.4.A.3| | 1 |
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under door step (6.1.1 (c) (i)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under door step (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under door (6.1.1 (c) (i)) | 1 |
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under door (6.1.1 (c) (i)) | 1 |