Most common failures | No# failures |
---|
Rear brake binding | 7 |
Windscreen wiper does not clear the windscreen effectively | 7 |
Registration plate lamp issues | 4 |
Headlamp aim out of alignment | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Nearside Rear All position lamps not working |1.1.A.3b| | 2 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Driver`s seat insecure |6.2.A.1| | 2 |
Registration plate issues | 2 |
Nearside Rear Upper All position lamps not working |1.1.A.3b| | 1 |
Offside Front Upper All position lamps not working |1.1.A.3b| | 1 |
Nearside Rear Outline marker lamp not working side marker (4.2.1 (a) (ii)) | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Front Upper Position lamp not working |4.2.1 |a|| | 1 |
Windscreen wiper blade insecure | 1 |
Nearside Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working side marker |1.1.A.3b| | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Brakes imbalanced across an axle | 1 |
Offside All position lamps not working |1.1.A.3b| | 1 |
Rear brake application uneven | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front chassis next to radiator crossmember - as marked (6.1.1 (c) (i)) | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel (1.1.6 (c)) | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Rear All position lamps not working |1.1.A.3b| | 1 |
Nearside Outline marker lamp not working all side lamps (4.2.1 (a) (ii)) | 1 |
Offside Front Outline marker lamp not working central (4.2.1 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength by jacking point (5.3.6 (a) (i)) | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength in several places (5.3.6 (a) (i)) | 1 |
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.0| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Brake pipe inadequately supported bracket broken of body |3.6.B.1| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded jacking point area |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |