>

MOT History from tests of petrol CHEVROLET CAMAROs year 1994

Review the list of common CHEVROLET CAMARO failures below or to perform a specific mot history check on your CHEVROLET then use our popular KnowYourCar service

mot history
Pass percent:76.25%
(The average a petrol CHEVROLET CAMARO year 1994 passes without issue)
Based on:80 MOT Tests
Most common failuresNo# failures
Brake pipe excessively corroded4
Registration plate issues3
Nearside Front position lamp|s| incorrect colour |1.1.A.3e|2
Offside Front position lamp|s| incorrect colour |1.1.A.3e|2
Parking brake: efficiency below requirements |3.7.B.7|2
Battery insecure |1.9.1|2
Rear fog lamp not working |1.3.2b|2
Service brake: efficiency below requirements |3.7.B.7|2
Offside Front Position lamp not working (4.2.1 (a) (ii))2
Headlamp aim out of alignment2
Rear parking brake recording little or no effort2
Anti-lock braking system warning lamp indicates an ABS fault2
Nearside Side repeater incorrect colour |1.4.A.2f|1
Offside Side repeater incorrect colour |1.4.A.2f|1
Offside Direction indicator not working |1.4.A.2c|1
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear brake disc excessively pitted |3.5.1h|1
Offside Rear brake disc excessively pitted |3.5.1h|1
Rear fog lamp tell tale not working |1.3.1b|1
Nearside rear brake recording little or no effort |3.7.B.5a|1
Rear brake binding1
Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))1
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))1
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))1
Suspension component mounting prescribed area is excessively corroded nearside front floor to sill |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded offside front floor to sill |2.4.A.3|1
Nearside Rear Stop lamp not working |1.2.1b|1
Driver`s seat cannot be secured in the upright position. |6.2.A.2|1
Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2|1
Horn not working |1.6.2a|1
Offside Stop lamp not working |1.2.1b|1
Offside Rear fog lamp not working |1.3.2b|1
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Position lamp not working (4.2.1 (a) (ii))1
Offside Stop lamp(s) not working (4.3.1 (a) (ii))1
Body component corroded and likely to cause injury battery tray (6.2.1 (a) (i))1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Nearside Headlamp aim beam image kick up to the offside |1.8|1
Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e|1
Offside Front Front position lamp|s| incorrect colour |1.1.A.3e|1
Nearside Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3|1
Offside Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3|1
Anti-lock braking system warning lamp does not illuminate |3.4.1b|1
Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Offside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Nearside Headlamp not working on dipped beam |1.7.5a|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Supplementary Restraint System warning lamp indicates a fault |5.4.2|1
Windscreen wiper does not clear the windscreen effectively1
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|1
Rear fog lamp obviously incorrectly positioned |1.3.2a|1
Offside Headlamp aim beam image kick up to the offside |1.8|1
Offside Front position lamp|s| not working |1.1.A.3b|1
Rear fog lamp adversely affected by the operation of another lamp |1.3.2f|1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both chassis to inner wings corroded (5.3.6 (a) (i))1
Front brake disc in such a condition that it is seriously weakened1
Brake fluid contaminated (1.8 (a))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy