MOT History from tests of petrol CAN-AM OUTLANDERs year 2008

Review the list of common CAN-AM OUTLANDER failures below or to perform a specific mot history check on your CAN-AM then use our popular KnowYourCar service

mot history

Pass percent:85.79%

(The average a petrol CAN-AM OUTLANDER year 2008 passes without issue)

Based on:197 MOT Tests

Most common failures	No# failures
Registration plate issues	15
Headlamp aim out of alignment	13
Horn not working \|1.6.2a\|	3
Horn not working (7.7 (a))	2
Centre Stop lamp not working \|1.2.1b\|	2
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Headlamp not working on dipped beam (1.7.5a)	1
Nearside Front position lamp\|s\| has less than 50% of the light sources illuminating \|1.1.A.3b\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
All direction indicators not working (4.4.1 (a) (ii))	1
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Rear Prop shaft joint excessively worn rear propshaft joint (6.1.7 (c) (i))	1
Nearside Front Direction indicator missing \|1.4.A.2b\|	1
Offside Front Direction indicator missing \|1.4.A.2b\|	1
Offside Rear reflector missing \|1.5.1a\|	1
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition \|7.1.4\|	1
Offside Front Obligatory mirror insecure \|8.1.1\|	1
Indicator tell tale missing \|1.4.A.2a\|	1
Centre Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Nearside Front Valve stem seriously damaged (5.2.3 (j))	1
Offside Front Valve stem seriously damaged (5.2.3 (j))	1
Nearside Rear Valve stem seriously damaged (5.2.3 (j))	1
Offside Rear Valve stem seriously damaged (5.2.3 (j))	1
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))	1
Stop lamp not working \|1.2.1b\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Upper Suspension arm has excessive play in a pin/bush front bush \|2.4.G.2\|	1
Offside Front Upper Suspension arm has excessive play in a pin/bush both bushes \|2.4.G.2\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Centre Rear position lamp\|s\| excessively damaged so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Central Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Steering locking device missing lower steering shaft \|2.2.C.1g\|	1
Offside Front Inner Drag link end ball joint has excessive play joint nut loose \|2.2.B.1f\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	15
Headlamp aim out of alignment	13
Horn not working \|1.6.2a\|	3
Horn not working (7.7 (a))	2
Centre Stop lamp not working \|1.2.1b\|	2
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Headlamp not working on dipped beam (1.7.5a)	1
Nearside Front position lamp\|s\| has less than 50% of the light sources illuminating \|1.1.A.3b\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
All direction indicators not working (4.4.1 (a) (ii))	1
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Rear Prop shaft joint excessively worn rear propshaft joint (6.1.7 (c) (i))	1
Nearside Front Direction indicator missing \|1.4.A.2b\|	1
Offside Front Direction indicator missing \|1.4.A.2b\|	1
Offside Rear reflector missing \|1.5.1a\|	1
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition \|7.1.4\|	1
Offside Front Obligatory mirror insecure \|8.1.1\|	1
Indicator tell tale missing \|1.4.A.2a\|	1
Centre Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Nearside Front Valve stem seriously damaged (5.2.3 (j))	1
Offside Front Valve stem seriously damaged (5.2.3 (j))	1
Nearside Rear Valve stem seriously damaged (5.2.3 (j))	1
Offside Rear Valve stem seriously damaged (5.2.3 (j))	1
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))	1
Stop lamp not working \|1.2.1b\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Upper Suspension arm has excessive play in a pin/bush front bush \|2.4.G.2\|	1
Offside Front Upper Suspension arm has excessive play in a pin/bush both bushes \|2.4.G.2\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Centre Rear position lamp\|s\| excessively damaged so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Central Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Steering locking device missing lower steering shaft \|2.2.C.1g\|	1
Offside Front Inner Drag link end ball joint has excessive play joint nut loose \|2.2.B.1f\|	1

MOT History from tests of petrol CAN-AM OUTLANDERs year 2008

Find us on Facebook