Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Headlamp aim beam image kick up to the offside |1.6| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 15 |
Registration plate issues | 14 |
Drive chain excessively loose |6.2.1d| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Horn not working |1.7.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Drive chain worn to excess |6.2.1e| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
Rear Seat insecure |6.2.1a| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
An item not tested |Manual| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Offside Handlebar deformed |2.1.1b| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Steering damper insecure |2.1.2d| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Offside Indicator switch defective |1.5.4| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Upper Direction indicator obscured |1.5.1a| | 1 |
Inner Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
Brake hose damaged | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Nearside Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front shock absorber seal failed and leaking oil Both front |2.3.3| | 1 |
Nearside Front Footrest missing |6.2.1a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Headlamp light source and lamp not compatible HID bulb fitted |4.1.4 |c|| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front suspension assembly component cracked |2.3.1| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Brake performance not tested |3.3| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Nearside Direction indicator insecure |1.5.3b| | 1 |
Offside Direction indicator insecure |1.5.3b| | 1 |
Handlebar deformed R/H |2.1.1b| | 1 |
Direction indicator missing All |1.5.1a| | 1 |
Rear Footrest missing L/H |6.2.1a| | 1 |
Fuel system component insecure fuel tank |7.2.1b| | 1 |
Rear Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Brake hose excessively deteriorated | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |